Thursday, June 24, 2021

Planning a Pit Building for The New Schweizering

Although it will be awhile before I can actually start construction of my track, I know enough about the overall design parameters that I can start building some of the major elements that will go into it. The major element here will be the grandstands and pit building, which will be built primarily from scratch while integrating the four Artin Grandstands I have into its upper level. The planned structure will actually be made in three separate sections, as all the buildings on the track will be removable and stored when the track is folded up against the wall. During setup, they can be dropped into place and the electrical connections for lighting can be plugged in.

This is the preliminary plan for the 3-level pit / grandstand structure.

Since the backstory of The Schweizering is that it is an all-new Swiss racing circuit featuring modern, state-of-the-art structures and amenities, I had to come up with a suitable design. Some of the buildings (including this one) will feature large-scale graphics showcasing some of the great Swiss racing drivers of the past, like Jo Siffert, Clay Regazzoni and many others. As usual, I construct these buildings primarily out of foam core, supplemented by cardboard and some bits of wood. Since there is a lot of glass--particularly in the central control tower--I've got plenty of acrylic sheet on hand, too. Integrating the Artin grandstands is pretty simple; the top level of the structure essentially gets "built around" them.

I think the large scale graphics on the side of the building will have a lot of impact.

I construct the building from the ground up; I used corrugated plastic board for the facade of the pits, as I like the subtle ribbed texture it has. I sprayed it with a silvery nickel metallic paint, to give it a contemporary, modern look. Foam core makes up the side and interior walls, which are covered with self-adhesive wall sheets I created on an inkjet printer in various color combinations. The photo below shows the individual wall sections ready for assembly; when ready, I'll print and place the interior back walls but the interior lighting will have to go in first. As you may note, the building is only about 6.75" deep, which just barely accommodates most slot cars; this is due to space limitations but should be adequate from a visual sense.

Here is the facade of the pit garage with the interior walls ready for assembly.

For interior lighting, I'll be using some LED strip sections in bright white, which should work well for the pit garages. I'll probably use a warmer white lighting in the VIP suites and the upper grandstand sections. While it's not rocket science, planning and running the lines to keep connections to a minimum and maintaining portability takes care. As I move forward on construction, I'll try to show as much progress as I can and even take some videos.



Sunday, June 20, 2021

First it was Garden Railroads. Now We've Got Garden Race Circuits...

Came across this cool video on the Goodwood website, featuring a wonderful 1:32 slot car track built in a back garden. The track, named the Borussia Ring, get it's name from a former colliery and features a number of fine plants scattered around the track. Thankfully there's plenty of space around the edge of the track, as I spy some real rocks placed along the layout.

This is green racing indeed...in a garden environment!

For more information and the original article, check out the link HERE.


Friday, June 18, 2021

Another Conversion Prospect: Ferarri 250 LM

While I know there are ready-to-run versions of the Ferarri 250 LM out there (at about $70 or more a crack) I have so far held off from purchasing one.  There have been many times in the past when I could have purchased a car when it first came out at about $50 or so and delayed long enough that it went out of production, became slightly rare, and subsequently was only available at a premium price.

It's an old kit from the 80's but complete and in like-new shape.

To that end, I picked up this nice MPC kit from the early 1980s which I intend to convert to a slot car. I have a few extra chassis available that might fit; I could also go the 3D printed route, I suppose. I don't need it to be a racer, but just run smooth and fast enough to keep up with most of my other classic Le Mans cars. The kit itself is pretty well detailed, and seems to fit together pretty well - so hopefully my skill will be up to the task.



Saturday, June 12, 2021

Recent Updates from The SLOT Garage

Been offline for a week or so trying to get caught up at work after my daughter's wedding in Cleveland on June 5th. It was a wonderful weekend that included a rehearsal dinner cruise on Lake Erie, a ceremony and reception in Cleveland's Grand Arcade and lots of dancing, revelry and great fun. Now that the wife and I can "return to our regularly scheduled programming" I have had a chance to get some things organized toward building my next track as well as expanding my slot car collection.

Some very nice additions to the GT stable.

Among my recent acquisitions are three sharp Scalextric GT cars, two Aston Martin GT3s and a Porsche 911 RSR. For the most part, I collect Le Mans-type cars, LMPs, Classics, Group Cs, IMSA, GTP and GT cars, so these fit right in. The Scarlett & Mustard-liveried Aston was my first purchase; I really wanted the black Darell Lea car but could not find one--naturally, it turned up on eBay about a week-and-a-half after I bought the first car. Thankfully, it was at a good price. I like the Proton Porsche, too--although I am a little embarrassed to admit that, as a whole, I've never been a big fan of the whole 911-based body family (GT1 excluded) but the RSR has some subtleties that make it a nice fit with other current GT cars, especially with the right livery, and this is it.
 
One other thing you might notice in looking at these three cars--and this is another secret nitpick--is that I hate black wheels. I know they are dominant in racing cars now and have been for a while, but I never liked the look of a "black hole" inside a wheel well; it just looks ugly and unfinished to me. If I have to, I'll settle for a well-outlined tire (with lettering or a stripe) and even a charcoal-gray or dark pewter rim or wheel...but I always try to avoid black if I can. Of course, with some cars, like a classic Porsche 917, there's no alternative - but I guess that's life.

A couple of classic GT kits for conversion.

I also have a few scratch-build projects/conversions I'll be working on as time allows. One is an old Lindberg Aston Martin DP212 static kit which is not very well-detailed but decent enough to use for a slot car. It's not a commonly-known Aston Martin but was raced at Le Mans in 1962. It will need a lot of work to convert, but it's an opportunity to turn what many might call a sow's ear into a leather purse, if not a silk one. The other conversion project is an Aoshima Toyota 2000 GT snap kit which has all the detail the Lindberg lacks; there are a couple of nice liveries I can choose from, including a Shelby-prepared SCCA racer from 1968 - (see below).




Wednesday, May 26, 2021

Less $ Spent on Tools Could Mean More $ for Slot Cars

Let me be the first to say the hobby manufacturers do a great job when it comes to bringing us the products we need, as well as some helpful innovations in terms of tools and supplies. That said, many of the "specialized" products sold for slot car repair and maintenance, as well for general hobbyists, aren't as special as they seem, and low-cost replacements or temporary substitutes can often get the job done--at least as a start.  For example, here are a few items I've picked up at the local $1 store that have already proven to be helpful:

All purchased for $1 USD each. Pretty handy.

First--slot cars are small--and they are filled with an assortment of "bits 'n pieces" that will inevitably get lost if you don't have a place to secure them. Leave a small screw, washer or bracket laying on the workbench and you can be sure your cat will swipe it onto the floor and under some furniture. The blue plastic snack tray is less than full size and has handy compartments to hold stuff during car assembly or disassembly. Likewise, the clear plastic storage box has lots of small compartments to hold extra screws, magnets, wheels and inserts--and even some small bits like car mirrors and other spare parts.

Maybe they don't qualify as "precision" screwdrivers. But how much precision do you need?

My favorite find so far was the small set of "precision" screwdrivers that came in its own plastic case. The set of six includes four Philips-head and two flat head tools in commonly-used sizes. Are there better tools out there? Certainly. But for a single US dollar, these are damn handy and make a great backup set, in any case. Buy a few, and if you lose a set, you won't care.  The last item is just a set of three snap-blade knives; common as dirt, but 3 for a dollar ensures that you'll have one around when you want one. They are a must for crafting and building scenery when an Xacto knife isn't really required.

Here in the USA, these were all found for $1 each at the local Dollar Tree chain, where just about everything is a dollar. Similar items can be found at stores like Family Dollar or Dollar General--I would imagine that there are these kind of discount chains elsewhere across the globe. This isn't to dissuade you from shopping your local hobby supply, but with the money you save, you might be able to pick up that slot car you want a little sooner...



Search SLOT, Links & the web

  © Blogger templates ProBlogger Template by Ourblogtemplates.com 2008

Back to TOP